Example Sharing of Buddha Fragrance Drying Machine Based on Heat Pump Drying Technology

A Buddhist incense factory in Zhongshan, Guangdong produces various types of Buddhist incense, such as wired incense, pan incense, incense cone (incense tower granules), smokeless incense, etc. Due to the high energy consumption and production cost of traditional Buddhist incense dryers, there are many rainy weather conditions when exposed to sunlight, and the requirement for a large drying field and high workload of workers, the production capacity cannot be increased. The air energy Buddha incense drying equipment not only solves the problem of drying in rainy days in Buddha incense factories, but also solves the problems of environmental protection, energy conservation, and cost saving in Buddha incense drying. After cost accounting, the electricity cost required to dry each kilogram of dried Buddhist incense is less than ten cents. Therefore, the manufacturer is very satisfied with the drying effect and energy-saving effect of Buddha incense, and has repeatedly added machines, replacing all traditional dryers in the past.

Hello River Brand heat pump Buddhist incense dryer uses an air source heat pump as the heat source, which is a new type of Buddhist incense dryer suitable for drying various types of Buddhist incense such as thread incense and pan incense. The equipment is based on the reverse Carnot cycle principle, only a small amount of electrical energy is required, and the compressor is used to drive the heat transfer medium in the pipeline to absorb heat from the external environment air. Then, the heat is released into the Buddhist incense drying room through a heat exchange device, integrating temperature and humidity sensing control technology, Combined with the polyurethane board room as the drying room, the temperature and humidity inside the drying room are accurately controlled. The continuous drying process is carried out through a hot air circulation system, ensuring that each batch of Buddhist incense has good drying quality and dryness. Compared to the electric drying machine, it saves two-thirds of the electricity and saves the cost of Buddhist incense drying. It does not require manual supervision, and the entire process is automated and intelligently managed. The drying cycle is short, saving electricity and labor.

‍Installation display of Buddhist incense dryer:‍

Buddha fragrance drying process:

Pre drying stage: Start the intelligent control system of the Buddha incense dryer, control the temperature at 45 ℃ and humidity at 60%, for 5-6 hours.

The second stage of Buddhist incense drying: control the drying temperature rise to around 50 ℃, humidity of 60%, and time of about 3 hours.

The third stage of Buddhist incense drying: continue to increase the temperature to around 55 ℃, humidity of 40%, and dry for about 1 hour to obtain the dried finished product. The drying of Buddhist incense is mainly done at medium to low temperatures, and the entire drying process can be completed in about 10 hours. The dried Buddhist incense is even and durable for storage.

Advantages of Hello River Brand heat pump Buddhist incense dryer:

1. The Buddha incense dryer adopts PLC touch screen intelligent control to meet the requirements of material curve drying process, integrating multiple functions such as timing, heating, refrigeration, dehumidification, moisture removal, and fresh air.

2. Breaking through the technical bottleneck of traditional dehumidifiers and ordinary heat pump dehumidifiers: solving the technical problem of poor dehumidification performance or even idling (compressor operation without water removal) of traditional dehumidification equipment under high temperature and low humidity conditions.

3. The unique hot air circulation system of the drying room brings heat to every corner of the drying room to increase the temperature of the drying room and take away the moisture evaporated from the materials.

4. The advanced fresh air pre dehumidification function can ensure the drying of incoming fresh air and meet strict drying processes.

5. The drying process is environmentally friendly and pollution-free, with no combustion or emissions, and fully complies with food hygiene standards. It is a sustainable and environmentally friendly product.

For industrial materials with complex process requirements, the Air Energy Buddha Incense Drying Equipment has a PLC touch screen central controller that can be programmed in different time periods to meet the different drying requirements of various industries through drying, dehumidification, enclosed dehumidification, humidity regulation, and cold drying. The stored drying process makes it easier for customers to dry!